By Scott Gieseler · Published
AUX heat is automatic backup assistance. Emergency Heat is a separate operating mode that uses backup heat without the heat pump. Seeing AUX on the thermostat does not, by itself, mean your system is broken.
For Kenner and Metairie homeowners, the useful question is not just which light is on. It is whether the house is warming normally, how long the message stays on, and whether anything changed recently.
What AUX heat means
On a heat-pump system, the controls can call for supplemental heat when the heat pump cannot meet the heating demand alone. Electric resistance strips are a common backup source. A dual-fuel system may use a furnace instead, and its controls can switch off the heat pump while the furnace operates.
AUX may appear during a large thermostat increase or a defrost cycle. There is no universal outdoor temperature at which every system needs it: equipment capacity, the home’s heat loss and control settings all matter.
How Emergency Heat is different
Emergency Heat, sometimes labeled EM Heat, runs the supplemental source without the heat pump. It is not simply a stronger version of normal Heat, and it is not the setting to choose automatically whenever the weather turns cold.
If you suspect the heat pump has failed, contact a technician and follow the operating instructions for your particular system. Do not use Emergency Heat as a substitute for finding the underlying problem. A thermostat’s available modes depend on the equipment and how it was configured.
Why the thermostat schedule matters
Electric resistance backup can cost more to operate than the heat pump. Raising the setpoint sharply may bring that backup on. A heat-pump-compatible thermostat with adaptive recovery can start warming the house earlier and reduce unnecessary resistance-heat use when recovering from a setback.
Before changing a schedule, check the thermostat manual. Do not change installer settings, auxiliary lockouts or equipment wiring just to make the AUX indicator disappear. Those settings need to match the installed system.
What to note before calling for service
- Write down the indoor temperature, set temperature and exact thermostat message.
- Note when AUX appeared and whether you had just raised the temperature.
- Check whether the home reaches its setting or continues getting colder.
- Take a photo of any displayed error code and have the thermostat model available.
Arrange service if backup heat seems unusually persistent, the home will not warm, or the system behaves differently from its normal pattern. The display alone cannot identify a failed part. Leave electrical panels, refrigerant work and control adjustments to a qualified technician.
Heating help in Kenner and Metairie
Tegridy Air can help you sort out a thermostat message and the next step for your heating system. Contact Tegridy Air or call 504-414-8655. Tell us what the thermostat shows and whether the house is maintaining temperature.
